poplajl.blogg.se - Rib scaffolding car body design

#Rib scaffolding car body design series

And there is no need to make any hole on the wall surface. Therefore mason’s scaffolding is completely independent of the wall surface. Put logs are supported at both ends on ledgers. But in double scaffolding, putlogs are not fixed with the wall. In case of brick layer’s scaffolding one end of putlog is fixed with wall.This is why it is named as double scaffolding. First row of standards is fixed close to the wall and second row of standard is fixed at a distance of 1.5 m from the first row. But in case of mason’s scaffolding two rows of standards are fixed into the ground. In case of brick layer’s scaffolding single row of standard is fixed into the ground.The primary differences between brick layer’s scaffolding and mason’s scaffolding are as follow: It is stronger than brick layer’s scaffolding. This type of scaffolding is commonly used in case of stone masonry. Double Scaffolding / Mason’s Scaffolding Double scaffolding Braces are cross diagonally fitted with the standards using rope lashing. If the height of the scaffolding is very high, to maintain its stability, sometimes diagonal members (named as Braces) are provided. Rope lashing is used to fasten the putlogs with ledgers. The putlogs (or transverse horizontal members) are placed at a horizontal spacing of 120 cm such that one end is supported on the ledgers and the other end is held in the holes made in the wall. Rope lashing is used to tie the standard with ledgers. Ledgers are tied with standards at every rise of 120 cm to150 cm (i.e. These standards are connected to each by a longitudinal horizontal member (named as Ledgers). The distance in between two standards is generally kept within 2.4 to 3 m.

#Rib scaffolding car body design series

In this type of scaffolding, a series of vertical members made of bamboo or timber (named as Standards), are firmly fixed into the ground in a row parallel to the building wall. Single Scaffolding / Brick Layer’s Scaffolding Brick layers scaffolding or Single scaffolding Needle Scaffolding or Cantilever Scaffoldingġ.

Mason’s Scaffolding or Double Scaffolding.

Brick layer’s Scaffolding or Single Scaffolding.

The following 4 types of scaffolding are commonly used in building construction work. Scaffolds also help to lift materials for the immediate uses at different heights. The primary aim of constructing a scaffold is to create a platform on which mason can work at different heights. Scaffolding is a temporary rigid structure made of still, bamboo or timber.